We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
one. HS series slurry pump is made for the constant pumping of substantial abrasive, large density slurries with small maintenance needs. The sporting parts are made of ultra chrome or and rubber. It will preserve substantial effectiveness above the put on existence of its factors.
2. The metal damp parts and rubber ones can be interchangeable for managing diverse liquids or slurries.
3. HS slurry pumps are accessible in dimensions ranging from 1 inch to 18 inch discharge and feature higher performance efficiency capable of circulation rates from ten.8 to 5400 m³/h and heads up to one hundred twenty five meters for high head types.
Characteristics:
1. Cylindrical structure of bearing assembly: convenient to adju EPT the space among impeller and EPT liner
and can beremoved comple tel: +86~thirteen 0571 88828y
2. Interchangeable anti-abrasive wet areas produced of high-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer large functioning force capabilities
and an additional evaluate of basic safety.
4. The discharge branch can be oriented to any 8 positions at the interval of forty five levels
five. Various drive kinds: DC(direct connection), V-belt push, equipment box reducer, hydraulic couplings, VFD,
S EPT handle, and so forth
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Common Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Design |
| • Alumina Industry | • Electricity Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Design | Max Electricity (Kw) |
Inlet & Outlet dimensions (inch) | Material for Wear Components | Circulation Fee (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | 12.6~28.eight | 3.5~eight | 6~sixty eight | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.4~seventy two | nine~20 | 6~58 | 1200~3200 | 184 |
| R | twenty five.2~54 | seven~fifteen | five.5~41 | a thousand~2600 | 178 | |||
| 50HS-C | 30 | three/two | M | 39.6~86.4 | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/3 | M | 86.4~198 | 24~55 | nine~52 | one thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~a hundred | twelve~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | a hundred~230 | ten~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~two hundred | seven~49 | four hundred~one thousand | 510 | |||
| 200MS-E | one hundred twenty | 10/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | eleven~sixty one | 400~850 | 686 |
| R | 540~1188 | 150~330 | 12~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | 700~1500 | thirteen~57 | two hundred~400 | 1370 |
| 25HHS-C | thirty | 1.5/1 | M | sixteen.2~34.two | four.5~9.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/two | M | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/4 | M | 324~720 | 90~two hundred | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~ninety four | 500~one thousand | 711 |
For the material of donning elements,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to contact us any time for particulars.
Your inquiry will get our prompt attention and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first gear manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the detailed replacement elements contained herein are not sponsored, approved, or made by the OEM.
