Highest put on resistance out there by sealing grease between pins and bushings
The durability of chain is radically improved considering the fact that grease is sealed among the pins and bushings by O-rings. The O-ring chain could be the most dependable model with the Greatest Daily life Chain Series with its superb dress in resistance even within the disorders or environments where chain maintenance is tough.
Advised employs.
?Circumstances exactly where frequent chain replacement is needed resulting from put on stretch
?Situations where lubrication during the services is unattainable
?In an surroundings with much soil, sand, dust, and so forth.
?Applications that call for power higher than that of the sintered bushing roller chain
Other options
?Reducing noise. (The noise level is three dB decrease compared to conventional roller chains.)
?Reducing vibration together with the friction produced by O-Ring. (The electrical power loss because of the friction is almost negligible, because the frictional force in between the pins and bushings is for usually during the applications.)
Selection of chains
The strength of an O-ring chain is almost the same as that of the typical roller chain. (Since the pins are longer than these of typical roller chain, the average rupture power is slightly reduced.)
For selecting a suitable chain, refer to “Selection of Chains” .
When the support ambient temperature is increased than 80° C, unique heat resistant O-rings should be utilised. In this case, make contact with us for far more data.
Connecting back links and offset links
Two types of connecting backlinks can be found: clearance match and interference fit. When substantial strength or sturdiness is required, use interference-fit connecting hyperlink. Only 2POJ is obtainable since the offset website link for all sizes.
Sprockets
O-ring chain utilizes longer pins than a regular roller chain. When utilizing multiplex O-ring chain, the regular sprocket for multiplex chains cannot be used.
Caution
O-ring chain is not really recommended in applications the place solvents or other substances might assault “Nitric Rubber”. Unique material O-rings are also available for these problems: Please consult us for information. Normally, “Nitric Rubber” is damaged by contact with all the following chemical components.