Our solution assortment also covers locking assemblies (clamping components/locking unit), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, common joint, rod finishes and yokes.
Overview
Fast Information
- Applicable Industries:
-
Constructing Material Stores, Manufacturing Plant, Machinery Restore Retailers, Foodstuff & Beverage Manufacturing unit, Farms, Vitality & Mining
- Place of Origin:Zhejiang, China
- Manufacturer Name:
-
OEM
- Product Variety:
-
G3FM
- Rated Power:
-
.2kw
- Pace ratio:
-
thirty
- Housing substance:
-
Aluminium alloy
- Mounting positions:
-
Foot mounting
- Output shaft dia:
-
22mm
- shade:
-
Blue/Silver
- Dimension:
-
293*198*172mm
- Bodyweight:
-
12kg
- Certification:
-
ISO9001:2008
Source Capability
- Provide Ability:
- 30000 Set/Sets for every Thirty day period
Packaging & Shipping
- Packaging Specifics
- one pc / carton,numerous cartons / wooden pallet
- Port
- NingBo port / Shanghai port / UPS / DHL/ TNT
On the web Customization
Specifications
one.Helical geared motor
2.Flange mounted
three.Ratio,5—200:one,rated energy,.1—2.2kw
4.Aluminium & cast iron alloy body
A few-section helical geared motor,flange mounted
• Two kinds of housings: Aluminum alloy and cast iron Two types of frames: foot mounting and flange mounting,good-searching in visual appeal, suitable for universal mounting.
• Helical gear with the higher-tensile alloy content can make the development more compact, housing smaller, performance increased, output torque greater.
• Hardened going through & properly-finished transmission equipment has the advantages as, rarely distortion, substantial precision,stable running, reduce sound, possible to work continuously below the dreadful problems.
• With 6 specification for the diameter of output shaft: Ø18,Ø22,Ø28,Ø32,Ø40,Ø50.
• Two or three-stage transmission, large ratio variety, each single body measurement with fourteen ratios from 5:one to two hundred:1.
• Using high good quality bearing prolongs the use lifestyle.
• High-functionality oil seal stops the lubricant from leaking again to the internal of motor.
• Three-period motor combined the normal and total-enclosed aluminum motor, good in watertight, easy in heat dissipation, substantial in operating effectiveness.
• Modular mixture extends the transmission ratio from i=five:1 to 1400:one.
Technological & define dimensions,
|
Defective reason |
investigation |
Solution method |
|
|
Sounds |
Knocking |
Gear surface damaged |
Contact manufacturer,replace gear set |
|
Continual cacophony |
Bearing damaged |
Replace the damaged bearing |
|
|
Periodical cacophony |
Particle on gear surface |
Check gear surface |
|
|
Neigh |
Lack of lubricant |
Fill with lubricant |
|
|
Intermittent cacophony |
Dirty lubricant |
Replace the new lubricant |
|
|
Shake |
Fixed foundation shake |
Deflective mount on the surface |
Re-adjust fixed pedestal |
|
Output shaft shake |
Bearing damage |
Replace the damaged bearing |
|
|
Inner gear parts shake |
Gear damage |
Replace the damaged gear |
|
|
Housing shake |
Defective gear assembly |
Re-adjust the gear set |
|
|
Leakage |
Oil seal leakage |
Oil seal vulcanize |
Replace the damaged oil seal |
|
Housing leakage |
Housing with the sand hole |
Replace housing with the sand hole |
|
|
Housing shake |
O-ring damaged |
Replace the damaged O-ring |
|
|
Over-heating |
Oil seal damaged |
Over-tighten oil seal |
Replace over-tighten oil seal |
|
In excess of-heat housing |
Over-road |
Re-calculate load |
|
|
Lack of lubricant |
Low lubricant |
Fill with lubricant |
|
|
Above-heat motor |
1,the temperature of environment is too high two,airiness is bad 3,pressure is too high or too low |
one,take measure to reduce the temperature 2,clean out the wind passage and check the motor if cooling fan has been damaged 3,adjust electrical source pressure |
|
|
The motor can`t work |
|
Electrical source haven`t been switched on |
Check if the switch is contacted will, if the fuse wise is broken or the motor down-lead is broken |
|
The rotate speed of the output shaft is too low |
|
Wrong control connection outside Over loading Wrong ratio Electrical source pressure too low In excess of-load |
Correct is on the right connection Reduce the load Check the rotation ratio of the cooling fan and output shaft by hand Adjust electrical source pressure Reduce load |
|
Motor circumrotate,output shaft don`t circu mrotate |
|
Inner gear set damaged |
Please contact the manufacture to replace the gear set |