Product Description

 

PRODUCT

Granville Gearbox

After 20 years of deep plowing, Granville Group‘s gearbox has entered into the CHINAMFG of intelligent manufacturing from professional manufacturing. As a group member, manufacturer, and driving solution provider with independent intellectual property rights and brand integrating research and development, producing various types of speed reduction transmission equipment as a whole. 

The company is a national-level high-tech enterprise. It set up a transmission research institute, won provincial-level specialized, high-end and innovation-driven, municipal-level green factory and future factory honors, and has many listed companies and other high-quality customers. 

Product Series

RV/WP Worm Gear Reducer It is widely applied in light industry automation industries such as food and beverage, textile, solar photovoltaic.
RSKF Helical Gear Reducer It is widely applied in oil, metallurgy, mine, lifting, transportation, transportation, cement, construction, chemicals, textiles, printing and dyeing, pharmaceuticals, food, environmental protection and other industries.
SPN Planetary Gear Reducer This product is widely applied in metallurgy, mining, cement, chemical industry, building materials, construction machinery, lifting, port and ship, belt transport and other segments. 

RV/WP Worm Gear Reducer Series

RV worm gearbox is made of die-cast aluminum alloy, with beautiful housing, compact structure, large transmission ratio, and self-locking function under certain conditions, which is 1 of the most commonly used reducers. With a wide range of installation methods, standard output forms, and input interfaces, it provides a highly flexible drive system. Small volume, good thermal exchange performance, fast heat dissipation, high transmission efficiency, suitable for all-round installation. It is widely applied in light industry automation industries such as food and beverage, textile, and solar photovoltaic.

RV SERIES
PRODUCT HIGHTS
More Durable Better Transmission Efficiency
RV reducer has the advantage of lighter and more durable than conventional worm gear reducer Adopting European advanced technology design makes the reducer transmission efficiency even better.
INTRODUCTION

RV reducer draws on the domestic and foreign technology, andhas a unique “square box” shape structure, which is die-casted from aluminumalloy. The housing has good appearance, compact structure and largetransmission ratio, and has self-locking function under certain conditions. Itis 1 of the most commonly used reducers.

PARAMETERS
Transmission Ratio 7.5-100 double stage combination up to -10000
Input Power 0.06-7.5KW
Output Torque 24.6-1192Nm
Input Type IEC standard motor interface / NEMA motor interface, CHINAMFG input shaft
Output Type hollow shaft, insert CHINAMFG shaft, flange
FEATURES
RV worm gear reducer is a global HangZhoustone inthe industry. It has a variety of installation methods. As standard options,output forms and input interfaces provide a highly flexible drive system withsmall volume, good heat exchange performance, fast heat dissipation, smoothoperation, low vibration, low noise, high transmission efficiency and largeoutput torque. It is suitable for omnidirectional installation.

FACTORY

Our employees have the expertise and experience to provide excellent service to our customers and help them achieve their goals.

At the same time, we expect them to create an environment of teamwork and Shared responsibility. Our leaders must be logical, undistracted, accountable, and run the team with respect, trust, and fairness.

Safety is the fundamental value, which permeates our products, services and ways of working. We never compromise on the health and safety of our employees.

TEST CENTER
GEAR FACTORY
ASSEMBLY SHOP
WAREHOUSING LOGISTICS

 

ABOUT US

Granville Group
Granville Group started from London and gradually oriented to global markets through resource integration, the Granville’s businesses are present across 5 continents. We operate in 4 industry clusters: Components for Industry and automotive; Machine tools and mechatronics; Energy and New materials, and Healthcare.

Granville Industrial Co., Ltd. 
Granville Industrial Co., Ltd., which was founded in Britain, and involved in various auto parts, is 1 of the important manufacturers and suppliers worldwide.

HangZhou Granville Mechanical and Electrical Co., Ltd. 
To maximize meet customer needs and market requirements for flexible reactions, Granville research and development, design, manufacture, business integration, and almost the whole business process through HangZhou Granville Mechanical & Electrical Co., Ltd. since 2012. In main foreign markets, products are sold all over the world. 
 

Granville Brands

GIL bearing and power transmission products
TANN mounted bearing units and related accessories
G-TECH AUTOMOTIVE automotive aftermarkt parts
YANGSEN cnc machine tools
GIL ELECTRONIC electrical motor product and solutions

Values

Corperate Culture Discipline, Treats people the enthusiasm, Diversity, Teamwork
Our Core Value Thoughtcast, Innovation, and Progressive
Focus The company focuses on supply chain management and customer service

 

You Can Get
Granville offers a full range of services to both OEM and aftermarket customers around the world, in every major industry, at each phase of the asset life cycle. 
Granville advanced service solutions can help you to:

Improve productivity
Reduce maintenance costs
Improve energy efficiency
Optimise designs
Reduce time to market
Reduce total cost of ownership

We strictly follow the core of quality management process control:

APQP Advanced Product Quality PlHangZhou
SPC Statistical Process Control
MSA Measurement System Analysis
PFMCA Potential Failure Modes and Consequences Analysis
PPAP Production Part Approval Procedure

 

Product Ranges
From conception, to innovation, to improve, we are in new transmission solution innovation is your trustworthy partner. 

Bearings Machine Tools
CNC Machines Chains
Sprockets Transmission Parts
Automotive Spare Parts Automation
in Vitro Diagnostic Minerals

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery, Car
Function: Distribution Power, Change Drive Torque, Speed Reduction
Layout: Three-Ring
Samples:
US$ 200/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

agricultural gearbox

Lubrication Practices for Extending the Lifespan of Agricultural Gearboxes

Proper lubrication is essential for ensuring the longevity and optimal performance of agricultural gearboxes. Here are some essential lubrication practices that can help extend the lifespan of these gearboxes:

  • Choose the Right Lubricant: Select a high-quality lubricant specifically designed for gearboxes and agricultural machinery. Consider factors such as viscosity, temperature range, and load-bearing capacity to ensure compatibility with the gearbox’s operating conditions.
  • Regular Inspection: Perform regular visual inspections of the gearbox and lubricant to check for signs of contamination, wear, or inadequate lubrication. Address any issues promptly to prevent further damage.
  • Cleanliness: Maintain a clean environment around the gearbox to minimize the risk of dirt, debris, and moisture entering the gearbox housing. Contaminants can compromise the lubricant’s effectiveness and accelerate wear.
  • Lubricant Level: Monitor and maintain the proper lubricant level in the gearbox. Insufficient lubrication can lead to increased friction and heat, causing premature wear and potential damage to gears and bearings.
  • Replace Lubricant: Follow the manufacturer’s recommendations for lubricant change intervals. Over time, lubricants can degrade, lose their properties, and become contaminated. Regularly replacing the lubricant helps ensure optimal performance.
  • Use Lubrication Schedule: Create a lubrication schedule based on the gearbox’s usage and operating conditions. Stick to the recommended intervals for applying or changing lubricant to prevent under-lubrication or over-lubrication.
  • Appropriate Lubrication Method: Follow the manufacturer’s guidelines for the correct lubrication method, whether it’s through oil bath, grease, or automatic lubrication systems. Proper application ensures even distribution of lubricant across gear surfaces.
  • Temperature Considerations: Be aware of temperature variations in your operating environment. Extreme temperatures can affect lubricant viscosity and performance. Choose a lubricant that can handle the temperature range of your equipment.
  • Expert Advice: Consult the gearbox manufacturer or a lubrication specialist to determine the best lubrication practices for your specific agricultural gearbox model and application.

By adhering to these lubrication practices, farmers can maximize the lifespan of their agricultural gearboxes, minimize downtime, and ensure efficient and reliable operation of their equipment.

agricultural gearbox

Potential Challenges in Maintenance and Repairs of Agricultural Gearboxes

Maintenance and repairs of gearboxes in agriculture can pose several challenges:

  • Harsh Environments: Agricultural machinery operates in challenging environments with exposure to dirt, debris, moisture, and varying temperatures. These conditions can accelerate wear and corrosion, necessitating frequent maintenance.
  • Heavy Workloads: Gearboxes in farming equipment often handle heavy workloads, leading to increased stress on components. This can result in faster wear and tear, requiring more frequent inspections and part replacements.
  • Accessibility: Some gearboxes are located in hard-to-reach areas of machinery. This makes regular maintenance and repairs more challenging, as technicians may need specialized tools and equipment to access and service the gearboxes.
  • Specialized Knowledge: Proper maintenance of agricultural gearboxes requires specialized knowledge and skills. Inadequate understanding of gearbox mechanics and maintenance practices can lead to improper repairs, reducing the gearbox’s lifespan and efficiency.
  • Costs: Repairing or replacing gearbox components can be costly, especially for heavy-duty agricultural machinery. Farmers need to consider both the direct costs of parts and labor, as well as potential downtime during repair processes.
  • Downtime: The downtime required for gearbox maintenance or repairs can impact farming operations, especially during critical planting or harvesting seasons. Efficient scheduling and backup equipment can help mitigate this challenge.
  • Availability of Parts: Obtaining replacement parts for older or less common gearbox models can be challenging. Farmers may need to source parts from specialized suppliers, leading to potential delays in repairs.

Addressing these challenges requires proactive maintenance planning, regular inspections, proper training of maintenance personnel, and sourcing spare parts in advance.

agricultural gearbox

Contribution of Agricultural Gearboxes to Tractor Functionality

An agricultural gearbox is a vital component of a tractor’s powertrain system, playing a pivotal role in enabling the tractor to perform a wide range of tasks on the farm. The functionality of tractors heavily relies on the proper operation of their gearboxes, which facilitate various essential functions:

  • Power Transmission: Tractors are required to deliver substantial power and torque to perform tasks like plowing, tilling, and hauling. Agricultural gearboxes transmit power from the tractor’s engine to its wheels or other implement attachments, enabling efficient power delivery to the ground.
  • Speed Control: Different agricultural tasks demand different speeds. Gearboxes allow operators to control the speed of the tractor to match the requirements of the task at hand. Whether it’s slow-speed operations like tilling or high-speed transport, the gearbox provides the necessary speed adjustments.
  • Implement Attachment: Tractors are often used with a variety of implements, such as plows, harrows, and mowers. The gearbox facilitates the connection and operation of these implements by transmitting power and torque from the tractor’s engine to the implement’s working components.
  • Directional Changes: Agricultural gearboxes enable tractors to change direction smoothly. They provide the necessary gearing arrangements to reverse the tractor’s movement, making it easy to maneuver around the farm, fields, and obstacles.
  • Adaptation to Terrain: Agricultural gearboxes help tractors adapt to different terrains and soil conditions. By adjusting the gear ratio, tractors can optimize their performance for tasks like climbing slopes, working on uneven ground, or pulling heavy loads.

Modern agricultural gearboxes are designed for durability and reliability in the demanding farming environment. They are often equipped with features like multiple gears, synchronization mechanisms, and efficient lubrication systems to enhance their performance and longevity.

Regular maintenance and periodic checks are essential to keep the agricultural gearbox in optimal condition. Proper lubrication, gear inspection, and addressing any signs of wear or damage contribute to the longevity and consistent performance of the gearbox, thus ensuring the tractor’s functionality throughout the farming seasons.

China Hot selling Double stage combination up to -100000.06-7.5KW 24.6-1192Nm RV Series Worm Gearbox   manufacturer China Hot selling Double stage combination up to -100000.06-7.5KW 24.6-1192Nm RV Series Worm Gearbox   manufacturer
editor by CX 2024-02-07