We EPG is a expert company and exporter that is worried with the style, growth and manufacturing.- EPG Group the greatest agricultural gearbox and pto factory in China with 5 distinct branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Oval Flange Models
The UCFL 2 bolt flange device (RHP SFT and MSFT series) consists of a bearing insert with a spherical outer diameter in a forged iron housing. The bearing is typically fixed to the shaft by signifies of two set screws in the prolonged portion of the internal ring.
Material:
Housing, gray solid iron.
Bearing, ball-bearing steel 100Cr6.
Seal, rubber NBR.
Edition:
Housing, painted.
Notice:
Pillow block bearings consist of a sealed solitary-row ball bearing with a spherical outer ring which is mounted in a housing. Due to the fact of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are made with a additionally tolerance. This outcomes in changeover or push matches when making use of shafts with h-tolerances. The shaft is secured by grub screws on the interior ring.
In typical applications, pillow block bearings are servicing-free of charge owing to the lifetime lubrication. In hard environmental circumstances re-lubrication can be carried out in excess of the grease nipple.
All housing proportions are nominal dimensions for which the usual casting tolerances should be taken into consideration.
Temperature variety:
-15 °C to +a hundred °C.
Purposes
• Belt, bucket and chain conveyors
• ept and metallurgical equipment
• Industrial air managing units
• Followers, pumps and blowers
• Textile equipment
• Agricultural and forestry equipment
• Foods and beverage processing products
• Wastewater remedy products
• Reining gear
• Professional laundry products
Application requirements
• Prepared-to-mount and ready-to-run
• Strong design and trustworthy remedy
• Successful sealing
• Stuffed with top quality grease
• Makes it possible for 1,5° of misalignment
• Accommodate thermal elongation of the shaft
| Unit No. | Shaft Dia | Proportions (mm) | Bolt size | Bearing No. | Housing No. | Mass (kg) | ||||||||||
| d | H | J | L | A2 | A1 | A | E | N | S | A4 | ||||||
| (in.) | (mm) | |||||||||||||||
| UCFL201S | 12 | 99 | 76.five | 57 | 15 | 11 | 24.five | 30.nine | 11.5 | 11.5 | — | M10 | UC201S | FL203 | .37 | |
| 201-8S | 1/two | 201-8S | ||||||||||||||
| 202S | fifteen | 202S | .36 | |||||||||||||
| 202-10S | 5/eight | 202-10S | ||||||||||||||
| 203S | 17 | 203S | .35 | |||||||||||||
| 203-11S | 11/16 | 203-11S | ||||||||||||||
| UCFL201 | 12 | 113 | 90 | 60 | 15 | 11 | 25.five | 33.3 | 11.5 | 12.7 | 37.5 | M10 | UC201 | FL204 | .forty seven | |
| 201-8 | one/two | 201-eight | ||||||||||||||
| 202 | 15 | 202 | .forty five | |||||||||||||
| 202-10 | 5/eight | 202-10 | ||||||||||||||
| 203 | 17 | 203 | .forty four | |||||||||||||
| 203-eleven | eleven/sixteen | 203-eleven | ||||||||||||||
| 204-12 | 3/four | 204-12 | ||||||||||||||
| 204 | 20 | 204 | .42 | |||||||||||||
| UCFL205-fourteen | seven/8 | 130 | 99 | 68 | 16 | 13 | 27 | 35.7 | 11.five | 14.3 | 40 | M10 | UC205-14 | FL205 | ||
| 205-15 | fifteen/sixteen | 205-fifteen | ||||||||||||||
| 205 | twenty five | 205 | .sixty one | |||||||||||||
| 205-16 | 1 | 205-16 | ||||||||||||||
| UCFL206-18 | 1-1/eight | 148 | 117 | 80 | 18 | 13 | 31 | 40.2 | 11.five | 15.9 | 44 | M10 | UC206-eighteen | FL206 | ||
| 206 | thirty | 206 | .nine | |||||||||||||
| 206-19 | one-3/sixteen | 206-19 | ||||||||||||||
| 206-20 | 1-1/4 | 206-twenty | ||||||||||||||
| UCFL207-20 | 1-1/4 | 161 | 130 | 90 | 19 | 14 | 34 | 44.4 | 14 | 17.5 | 48.five | M12 | UC207-20 | FL207 | ||
| 207-21 | one-5/16 | 207-21 | ||||||||||||||
| 207-22 | 1-3/8 | 207-22 | ||||||||||||||
| 207 | 35 | 207 | 1.21 | |||||||||||||
| 207-23 | 1-7/16 | 207-23 | ||||||||||||||
| UCFL208-24 | one-1/two | 175 | 144 | 100 | 21 | 14 | 36 | 51.two | 14 | 19 | 55 | M12 | UC208-24 | FL208 | ||
| 208-25 | one-9/sixteen | 208-25 | ||||||||||||||
| 208 | 40 | 208 | 1.fifty five | |||||||||||||
| UCFL209-26 | 1-5/eight | 188 | gearbox mini tiller Gomel Belarus 148 | 108 | 22 | 16 | 38 | 52.two | 18 | 19 | 57 | M16 | UC209-26 | FL209 | ||
| 209-27 | 1-eleven/sixteen | 209-27 | ||||||||||||||
| 209-28 | one-3/4 | 209-28 | ||||||||||||||
| 209 | 45 | 209 | 1.87 | |||||||||||||
| UCFL210-30 | one-7/8 | 197 | 157 | 115 | 22 | 16 | 40 | 54.six | 18 | 19 | 60 | M16 | UC210-30 | FL210 | ||
| 210-31 | one-15/sixteen | 210-31 | ||||||||||||||
| 210 | fifty | 210 | 2.16 | |||||||||||||
| 210-32 | two | 210-32 | ||||||||||||||
| UCFL211-32 | two | 224 | 184 | 130 | 25 | 18 | 43 | 58.four | 18 | 22.two | 64 | M16 | UC211-32 | FL211 | ||
| 211-34 | two-1/8 | 211-34 | ||||||||||||||
| 211 | 55 | 211 | two.89 | |||||||||||||
| 211-35 | 2-3/16 | 211-35 | ||||||||||||||
| UCFL212-36 | two-1/four | 250 | 202 | 140 | 29 | 18 | 48 | 68.7 | 18 | 25.four | 74.5 | M16 | UC212-36 | FL212 | ||
| 212 | sixty | 212 | 3.seventy five | |||||||||||||
| 212-38 | 2-3/8 | 212-38 | ||||||||||||||
| 212-39 | two-7/16 | 212-39 | ||||||||||||||
| UCFL213-forty | 2-1/two | 258 | 210 | 155 | 30 | 20 | 50 | 69.7 | 23 | 25.four | 79 | M20 | UC213-forty | FL213 | ||
| 213 | sixty five | 213 | 4.sixty eight | |||||||||||||
| UCFL214-forty four | 2-3/4 | 265 | 216 | 160 | 31 | 20 | 54 | 75.4 | 23 | 30..two | — | M20 | UC214-forty four | FL214 | ||
| 214 | 70 | 214 | five.26 | |||||||||||||
| UCFL215-forty seven | two-15/sixteen | 275 | 225 | 164 | 34 | 22 | 55 | 78.five | 23 | 33.three | M20 | UC215-forty seven | FL215 | |||
| 215 | seventy five | — | 215 | |||||||||||||
| 215-forty eight | 3 | 215-48 | five.38 | |||||||||||||
| UCFL216 | 80 | 290 | 233 | 180 | 34 | 22 | 58 | 83.three | twenty five | 33.three | — | M22 | UC216 | FL216 | 6.76 | |
| UCFL217-52 | three-1/4 | 305 | 248 | 190 | 36 | 22 | 63 | 87.six | 25 | 34.1 | — | M22 | UC217-52 | FL217 | ||
| 217 | eighty five | 217 | eight.48 | |||||||||||||
| UCFL218-fifty six | three-1/two | 320 | 265 | 205 | 40 | 23 | 68 | 96.three | 25 | 39.7 | — | M22 | UC218-56 | FL218 | ||
| 218 | ninety | 218 | ten.three | |||||||||||||
ZheJiang DSR Bearing can offer you with the broadest feasible array of bearings. In addition to Ball bearing, Roller bearing, Needle bearing, Pillow Blocks, we manufacture Flange blocks, Rolling mill bearing, Slide bearing and Water pump bearing. Our unparalleled encounter as a complete producer and exporter for these industries is crucial for the development and software of a leading solution line for all common industries.
We delight ourselves on our capability to serve every client, from backyard mechanics, to independent shop house owners, to automotive specialists, to large producing plants. Our Target Industries served are Agricultural Equipment, Cranes, Electric Motors, Gearboxes, Materials Dealing with, Packaging Equipment, Energy Resources, Pumps, Railways and Transportation, Robotics, and goods for Textile Machinery. ZheJiang Bearing Business is a much better and developing exporter of bearing in China.
In addition to manufacturing commodity-based mostly bearing goods, DSR Bearing can make custom made bearing answers for OEM. ZheJiang DSR bearing has stringent quality control standards and maintains full handle over offer, utilizing only the maximum quality bearing steel.
Our mission is to fully provide for you. ept into our much more than 10 several years of business, we are confident that you may discover what you might be loo ept for in bearing product listed here. Make sure you phone, e-mail, or cease by for much more info.
We are extremely self-confident in our products, and we are sure that we can earn your have faith in!
Q: What the MOQ of your company?
A: In stock, MOQ is 1pc.
Q: Could you accept OEM and customize?
A: Of course, we can customise for you according to sample or drawing.
Q: Could you source sample for cost-free?
A: Indeed, we can source sample for cost-free, you only need to have to pay out for the transport expense.
Q: Is you company factory or ept Business?
A: We have our very own factory, our kind is manufacturing facility + trade.
Q: Could you notify me the substance of your bearing?
A: We have chrome steel, carbon metal, stainless steel and ceramic.
Q: Could you supply door to door services?
A: Yes, by convey (DHL, FEDEX, TNT, EMS) 4-ten days to your metropolis.
Q: What is your organization payment conditions?
A: T/T. Western Union, PayPal
Q: Could you notify me the supply time of your items?
A: If inventory, in 7 days or base on your purchase amount.
Pricey pal, if you have any queries, make contact with us remember to.
The use of authentic products manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the outlined replacement components contained herein are not sponsored, accredited, or produced by the OEM.
